There comes a point in every minifigure collection when the storage box starts looking less like organization and more like a very crowded evacuation. A pirate is wearing somebody else’s helmet. The astronaut has lost a hand. Meanwhile, the one figure you actually wanted to admire is underneath seventeen capes and a tiny baguette.
Finity Frames is a modular wall display built to get those little residents out of the drawer. Its white frames connect into a larger display as the collection grows, sharing edges instead of putting two chunky borders side by side. It is a surprisingly sensible response to a hobby in which buying another tiny plastic person can feel like an emergency.
The system comes from Perth-based designer and collector Stephen Peaple. It is currently being offered through Kickstarter, so think of this as a project to back rather than a ready-to-ship display cabinet. The appeal is easy to understand: give the collection a permanent address, then leave room for the neighbors who will inevitably arrive.
A minifigure display with room for the next obsession
A fixed display asks you to predict how many figures you will eventually own. That is an optimistic question to ask someone who has already described a purchase as “just finishing this one series.” Finity Frames lets you start with a smaller arrangement and extend it horizontally or vertically later.
There is a practical boundary to that freedom. The assembled outline must remain rectangular or square. You can change its orientation, but this is not a kit for drawing an enormous plastic lightning bolt across the living-room wall. The neat grid is part of the point.
Shared edges also mean a larger kit is not a stack of complete independent frames. The maker specifically notes that a 2×2 kit cannot become four separate 1×1 displays using only its supplied pieces. Keep that in mind if your eventual plan involves dividing a collection between rooms.
The cover comes off when the cast needs rearranging
The clear front attaches magnetically, letting you lift it away for access. The frame uses UV-treated ABS plastic, while the cover is UV-stable Perspex acrylic. Finity Frames describes the cover as providing dust and UV protection; that is a useful feature, without turning a sunny window into the ideal home for every prized collectible.
Easy access matters because a collection rarely sits still. Today’s perfectly arranged crew may need to move when tomorrow’s tiny wizard arrives with an absurdly wide hat. A removable front makes that reshuffle less of a ceremony. Nobody should need to schedule a maintenance afternoon just to move a plastic saxophonist.
There is also something pleasant about separating the figures from the everyday clutter around them. On a desk, they can look like things you have not put away. On a wall, arranged with some intention, they start looking like an exhibition. Congratulations: the hobby has acquired curatorial language.
- Connect frames along shared edges to enlarge the overall display.
- Remove internal slats to make wider or taller spaces.
- Lift off the magnetic cover when rearranging figures or builds.
- Use a square or rectangular layout in portrait or landscape orientation.
Capacity depends on how much elbow room you allow
The simplest internal arrangement is a 4×4 grid: sixteen spaces in a single frame. At one minifigure per space, every character gets a proper little stage. The much bigger maximum-capacity figures depend on a denser layout, removing vertical slats and using jumper plates. Those are different display styles, so choose the one you actually want to look at.
A packed collection can be wonderful, particularly when the pleasure is seeing an entire theme together. A sparse arrangement makes individual costumes, expressions and accessories easier to appreciate. Neither approach is morally superior. One is a gallery opening; the other is the most colorful staff photograph ever taken.
| Listed configuration | Front dimensions | Maximum minifigures |
|---|---|---|
| 1×1 Starter | 312 × 312 mm | Up to 88 |
| 1×2 Duo | 312 × 610 mm | Up to 176 |
| 2×2 Collector | 610 × 610 mm | Up to 352 |
| 3×2 Lifestyle | 610 × 908 mm | Up to 528 |
| 4×3 Showcase | 1,206 × 908 mm | Up to 1,056 |
Those are the maker’s listed tier dimensions and maximum capacities. The biggest arrangement is a serious patch of wall, so measure your available space before mentally moving in the entire population. An empty rectangle marked out with tape can be more persuasive than an enthusiastic declaration that it will “probably fit above the sofa.”
The dividers do more than keep everyone in line
Each frame has three horizontal and three vertical internal slats. Removing them in different combinations produces 64 layouts, according to Finity Frames. That gives you a choice between tidy individual compartments and larger spaces for little scenes, oversized characters or an arrangement that refuses to respect alphabetical order.
The system is designed around LEGO dimensions. The maker shows plates and builds sitting inside the compartments, with some creations extending across the dividers. That makes the frame interesting for people who enjoy building a setting around their figures, rather than simply lining up a cast and declaring the job finished.
A tiny doorway, a few plants or a brick-built background can give a familiar character a new bit of theater. You could organize by theme, color or whatever elaborate story makes sense to you. Visitors may ask why the skeleton lives next door to the businessman. You are allowed to say the rent was reasonable.
Bigger figures need a little planning. Removing dividers creates more room, but depth still matters if you want the cover back on. The maker cautions that some especially bulky characters project too far forward. A wide belly does not become thinner merely because it has been assigned a larger apartment.
The official images show both individual figures and assembled scenes. Treat those as examples of what collectors can arrange, not a promise that the display arrives with that cast included. The collection is the part you bring to this particular decorating project.
A wall display for people who actually enjoy their collection
The nicest thing about the concept is that it makes looking at the collection convenient. You do not have to open a storage tub, clear the table or remember which drawer contains the good stuff. The figures are already there, doing their tiny, silent best to justify the wall space.
It could suit a hobby room, a home office or the part of a shared living space where everyone has agreed the plastic population may reside. It also rewards a little restraint. Leaving some breathing room around a favorite figure can be more effective than treating every available millimeter as an overdue storage opportunity.
Image credit: Finity Frames. The close-up marked as a prototype illustrates the brick-compatible layout; final frame material is described by the maker as white UV-treated ABS.
- Product: Finity Frames expandable wall display for minifigures and small collectibles.
- Layout: Connected square or rectangular arrangements with removable internal dividers.
- Front: Removable magnetic acrylic cover.
- Capacity: Depends on configuration and spacing; maximum counts use denser arrangements.
- Status: Crowdfunding project, with production and delivery still ahead.
Price and the wait for a less crowded drawer
The manufacturer’s launch page lists Kickstarter pricing from AU$79, approximately US$52, before considering any applicable shipping or taxes. Reward availability and final charges should be checked on the campaign. This is an independent product; the LEGO Group does not sponsor or endorse it.
Finity Frames targets delivery five to seven months after the campaign closes, subject to production timelines. That is a target rather than a guaranteed arrival date. Back it with the patience appropriate to a product still heading into manufacture. Your minifigures may finally get their gallery, but they should keep the cardboard-box lease for a little longer.
| Pros | Cons |
|---|---|
| Expands as a collection grows | Additional expansion requires more parts |
| Removable dividers allow varied displays | Maximum capacity means closer spacing |
| Magnetic cover provides convenient access | Very deep figures may prevent closure |
| Shared edges keep connected frames tidy | Larger kits cannot freely split into separate frames |
| Several wall-display sizes are listed | Crowdfunding delivery remains an estimate |
Save this find.
Thank yourself later.
Your next great gift idea. Your someday space. Your collection of wonderfully weird things.
Save to PinterestPick a board. Keep the inspiration.
This Expandable Minifigure Display Grows Along With Your Collection
Where to find This Expandable Minifigure Display Grows Along With Your Collection
OddityMall may earn a commission from qualifying purchases at no extra cost to you.
