A poolside speaker usually spends the afternoon being protected from the exact activity everyone came to enjoy. It sits on a towel, someone splashes, and suddenly a grown adult is guarding a Bluetooth connection like a priceless museum object. Mango proposes a different arrangement: let the speaker get in the water, too. The playlist can finally stop being the only guest afraid of the pool.
Mango is a floating Bluetooth speaker concept from London design studio ONMOTIO, with a rounded fabric-covered body, a translucent control surface, and a glowing ring around its base. The proposed design combines sound in every direction with a body intended to float face-up. It looks a little like a very relaxed electronic macaroon, which is considerably more inviting than the usual rugged black brick.
There is an essential detail before anyone starts planning its first cannonball: Mango is still in development. Its website says the first working prototype is being built in London. The specifications describe the intended product, and the imagery shows the maker’s visualizations. Reservations are open, but this is not an in-stock speaker with a delivery truck already warming up outside.
A speaker designed to join the pool party
The interesting part is the combination of floating and sound coverage. ONMOTIO has designed three two-way speaker modules around the body, with three passive radiators between them. Instead of one obvious front pointing toward the lucky person in the best chair, the arrangement is intended to spread music around the speaker. Everyone at the table gets a seat without first negotiating with a grille.
The sealed body is designed to remain upright on the water, with its top facing the sky and a substantial portion above the surface. ONMOTIO explains the buoyancy through its computer model rather than claiming a completed pool test. That distinction matters: an engineering calculation is useful evidence of design work, but it is not the same thing as a finished unit surviving an afternoon with enthusiastic relatives.
Mango also aims to adjust its sound when afloat. Water changes how the submerged parts of the speaker system move, so the proposed electronics would detect that change and correct the tuning. The studio explicitly describes this work as calculated and awaiting prototype confirmation. The ambition is consistent sound at ordinary listening levels, not a promise that water has politely agreed to stop affecting acoustics.
The controls are part of the surface
On top, the design replaces a row of separate hard buttons with a translucent membrane. Play, volume, pairing, and a palm-tree-marked beach mode sit within that surface. The intended interface lights up as a hand approaches, helping the controls stay visually quiet until they are needed. It is an appealing trick for an object meant to live on a table instead of looking permanently ready for a construction shift.
Wet controls are also a real design challenge, and ONMOTIO discusses different sensing approaches in its engineering notes. The finished experience will depend on how that interface behaves with splashes and wet hands. For now, the illuminated top is a proposed feature to watch, rather than a reason to assume every poolside tap will work perfectly.
- The floating body is intended to keep the control surface facing upward.
- Three speaker modules are arranged around the enclosure for broad sound coverage.
- A dedicated beach mode is designed to change the tuning for open-air listening.
- Two units are intended to pair as separate left and right stereo speakers.
- Magnetic stacking is proposed for a compact arrangement with fuller bass.
Stacking is an especially odd little flourish. ONMOTIO describes magnets and feet that align up to three units, while separating two would provide a stereo layout. That gives the same rounded object two different social arrangements: spread out across a table, or gathered into a tiny audio tower. Neither arrangement requires pretending a stack of speakers is a sensible substitute for a side table.
The planned specifications, with their conditions attached
Mango’s proposed size is 14.4 centimeters across and 8.2 centimeters tall. The consumer page lists 600 grams, while the studio’s detailed CAD breakdown totals about 610 grams. Treat the weight as roughly 600 grams at this stage, with production details still to be settled. It is small enough to imagine carrying to a picnic, but the actual product still has to earn that place in the bag.
| Detail | Maker’s current plan |
|---|---|
| Sound system | Three two-way modules and three passive radiators; about 40 W RMS |
| Dimensions | 14.4 cm across and 8.2 cm tall |
| Battery target | Up to 20 hours at 50% volume with the halo off |
| Wireless connection | Bluetooth 5.3 with two-phone multipoint |
| Water protection target | IP67, with a face-up floating body |
| Development status | First working prototype being built; production timing not confirmed |
The battery headline comes with a useful qualification: the planned 20 hours assumes half volume and the decorative halo switched off. Brighter evenings and louder playlists would change the result. The website also targets two hours of playback from ten minutes of USB-C charging, with a full charge taking about two and a half hours using a 20-watt charger. These remain maker specifications for the developing product, not results from our own testing.
Bluetooth multipoint is intended to keep two phones connected, so changing the music would not require a fresh pairing ceremony. That could make sharing DJ duties easier, though it cannot resolve the deeper household dispute about whether every barbecue needs the same nineteen songs. The stated range is up to 30 meters in open space; walls, people, and the surroundings can reduce it.
Three colors and a light ring with a job description
The launch palette includes Mango amber, Coconut cream, and Pacific turquoise. Each has the same rounded shape and woven exterior, with a halo that follows the music or holds a selected color according to the product page. The fabric is described as dyed through rather than printed. The visual effect is softer than the aggressive styling common to outdoor audio gear, especially in the pale Coconut version.
The planned IP67 protection is described as dust-tight with immersion protection to one meter for thirty minutes. The maker’s care guidance calls for rinsing away salt or pool water with fresh water and allowing the speaker to dry afterward. It also excludes hot tubs above 40 degrees Celsius, saunas, and pressure washers. Even the beach-themed speaker is allowed to decline a power-washing appointment.
The most plausible audience is someone who wants music around a pool, patio, or picnic table and likes the idea of an object that can float instead of merely tolerate a splash. Buyers who need a speaker for a trip next week should focus on the development status. A lovely rendering will not play a song, and a reservation is not a shipping confirmation.
The proposed box contains the speaker, a one-meter USB-C to USB-C cable, a quick-start card, and safety and warranty information. A wall charger is not included. Product visualizations shown throughout this article are from Mango; the studio explains the design and prototype work in its ONMOTIO project overview.
Key details before reserving a floating DJ
- Mango is an ONMOTIO-developed floating Bluetooth speaker currently at the prototype stage.
- The design combines a woven rounded body, translucent controls, and a light ring.
- Planned features include 360-degree sound, water-aware tuning, stereo pairing, and magnetic stacking.
- Three proposed colors are amber, cream, and turquoise.
- Battery life, water resistance, and sound performance are maker targets pending a finished product.
- Reservations take no payment; a production schedule and shipping date are to be provided before purchase confirmation.
The advertised early-bird price is €129, against a planned €149 retail price. Reserving is free, and Mango says payment happens only if you choose to proceed when the first production run opens. Its current shipping plan covers the 27 EU countries, the UK, and Switzerland, with tracked shipping, duties, and taxes included. U.S. availability is not listed in that plan, so American readers should not assume a domestic delivery option.
For now, the appeal is a particularly cheerful piece of product design: a speaker intended to float, share its sound around a group, and glow without turning the patio into a nightclub lobby. Whether it delivers on those promises will depend on the working prototype and production version. The pool invitation is ready. The guest is still getting dressed.
| Pros | Cons |
|---|---|
| Distinctive face-up floating design | First working prototype still under development |
| Planned sound coverage around the body | Acoustic results are not independently tested |
| Stereo pairing and magnetic stacking proposed | Multi-unit features require additional speakers |
| Free reservation without an upfront payment | No confirmed production or shipping date |
| Three colors and a configurable halo | Battery headline assumes the halo is off |
| USB-C cable included in the planned package | No wall charger; U.S. shipping not in the listed plan |
Save this find.
Thank yourself later.
Your next great gift idea. Your someday space. Your collection of wonderfully weird things.
Save to PinterestPick a board. Keep the inspiration.
This Floating Bluetooth Speaker Is Designed to Bring 360-Degree Sound Into the Pool
Where to find This Floating Bluetooth Speaker Is Designed to Bring 360-Degree Sound Into the Pool
OddityMall may earn a commission from qualifying purchases at no extra cost to you.
